NCP382LD15AAR2G
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 570mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP382 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 115μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 3 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.5mm |
NCP382LD15AAR2G Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C.As a default, the output is set to 2.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the NCP382 family.It has a total of 8 terminations.8 pins are used for operation.It is important to note that the LED driving board has 1 functions.With a supply voltage of 5V, high efficiency is possible.It is positioned in the direction of Surface Mount.There are 8 pins in total on this board.Lighting drivers with 110mOhm resistance are used.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.Optimal efficiency requires a voltage of 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.A minimum input voltage of 2.5V volts is required for this LED driver.There is a maximum current requirement of 115μA for its operation.Currently, there are 3 inputs available.
NCP382LD15AAR2G Features
Supplied from 5V
Resistance of 110mOhm
2 channels
NCP382LD15AAR2G Applications
There are a lot of ON Semiconductor NCP382LD15AAR2G Power Switches ICs applications.
- Portable Video Game Players
- Hard Disk Drives
- Portable Devices
- Telecom and Network Systems
- USB Power Distribution
- Various applications equipped with buttons
- Set-Top Boxes
- Mobile Communication Devices
- Smart Phones, Feature Phones
- Notebook PC