NCP380HMUAJAATBG
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 2.1A |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | Adjustable |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
NCP380HMUAJAATBG Description
The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered. The device includes an integrated 55 m (DFN package), P-channel MOSFET. The device limits the output current to the desired level by switching into a constant-current regulation mode when the output load exceeds the current-limit threshold or a short is present. The current-limit threshold is either user adjustable between 500 mA and 2.1 A via an external resistor or internally fixed. The power-switch rise and fall times are controlled to minimize current ringing during switching.
NCP380HMUAJAATBG Features
2.5 V – 5.5 V Operating Range
70 m High-side MOSFET
Current Limit:
User-adjustable from 500 mA to 2.1 A
Fixed 500 mA, 1 A, 1.5 A, 2 A, and 2.1 A
Under Voltage Lock-out (UVLO)
Built-in Soft-start
Thermal Protection
Soft Turn-off
Reverse Voltage Protection
Junction Temperature Range: ?40°C to 125°C
Enable Active High or Low (EN or EN)
Compliance with IEC61000?4?2 (Level 4)
NCP380HMUAJAATBG Applications
Laptops
USB Ports/Hubs
TVs