NCP3064DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCP3064 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Efficiency | 86 % |
| Output Voltage | 40V |
| Output Type | Adjustable |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative |
| Current - Output | 1.5A Switch |
| Max Output Voltage | 40V |
| Voltage - Output (Min/Fixed) | 1.25V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz |
| Halogen Free | Halogen Free |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Switcher Configuration | BUCK-BOOST |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP3064DR2G Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. In this voltage regulator, there are 8 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. For space-saving purposes, this voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. The voltage regulator is configured with 1 outputs. This DC DC switching regulator generates Adjustable output on its output pins. Surface Mount-mount switching regulator. Keeping dc to dc voltage regulator's operating temperature at 0°C~70°C TJ is essential when operating. This DC-DC switching regulator has a switching frequency of 150kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 1.25V. DC DC switching regulator's 1.5A Switch output current allows for maximum design flexibility. To meet the switching regulator operation requirements, a nominal input voltage of 5V is provided. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. DC/DC regulators such as this one belong to the NCP3064 family of products. At 40V volts, voltage regulator can provide voltage. The switching regulator operation of the system is controlled by 8 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.25V. For switching regulator maximum operation, dc to dc voltage regulator delivers 1.5A A. A maximum voltage of 40V can be obtained from the regulator voltage. A harley voltage regulator operates with a 40V supply voltage.
NCP3064DR2G Features
1 outputs
8 pins
Operating supply voltage of 40V
NCP3064DR2G Applications
There are a lot of ON Semiconductor NCP3064DR2G Voltage Regulators applications.
- Bending machines
- Elevator lighting
- Automation technology
- Sink circuits
- Computed tomography (CT)
- Packaging
- Experimental setup
- Correction machines
- Analog precision reference circuits
- Motor controller circuits