NCP1910B65DWR2G
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1910 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 12V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 20V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Output Current | 5mA |
| Max Supply Current | 8.6mA |
| Input Voltage (Min) | 10V |
| Frequency - Switching | 245kHz |
| Halogen Free | Halogen Free |
| Switcher Configuration | BOOST |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 100μA |
| Height | 2.36mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width), 23 Leads |
| Number of Pins | 24 |
| Weight | 307.790773mg |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 23 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -60°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
NCP1910B65DWR2G Overview
As far as packaging is concerned, it comes in a 24-SOIC (0.295, 7.50mm Width), 23 Leads package.There is a Tape & Reel (TR) package for this product.Mounting type Surface Mount describes the device.POWER FACTOR CONTROLLER is another IC type on the part.A number of 23 terminals can be found on the device.Currently, the startup current is 100μA.Pin number 24 remains the same for the component.The device's best part has a number of NCP1910 in it.In this case, 245kHz is the switching frequency.It has a sum of 24 pins.Minimum input voltage 10V is needed to operate it.It's like a subclass of Switching Regulator or Controllers.Located on mount Surface Mount, it forms part of the mountain range.As a rule of thumb, the component is always powered by a 12V volt supply.Depending on the supply temperature, it will work with a maximum of 8.6mA.2 outputs are numerous.A temperature of -60°C should be higher than the temperature of W when it is operating.At this point, the maximum operating temperature is 150°C.You can only use it with a voltage supply of 20V volts.
NCP1910B65DWR2G Features
NCP1910B65DWR2G Applications
There are a lot of ON Semiconductor NCP1910B65DWR2G PFC PMICs applications.
- Low-voltage microprocessor power supplies
- Voltage tracker protection circuits
- Light networks
- Servers
- Engine management
- DSP power
- LCD backlight
- Wired/Wireless audio systems
- Set top boxes
- Home electric appliance