NCP1605DR2G
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 1.27mm |
| Frequency | 250kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Input Voltage-Nom | 16V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Power Dissipation-Max | 550mW |
| Max Supply Current | 7mA |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.8A |
| Frequency - Switching | 250kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1605DR2G Overview
Currently, it is available as a SOIC package.It is packaged in a Tape & Reel (TR) way.There are other IC types in this part, such as POWER FACTOR CONTROLLER.Several 16 terminals are present on the gadget.A component's pin number remains 16.There is a switching frequency of 250kHz which is the frequency of switching.16 pins make up its sum.I suppose it can be considered a subclass of Switching Regulator or Controllers.With a frequency of 250kHz, it can continue to operate with good accuracy.The mountain forms part of mount Surface Mount.As a result, it works in a 0.8A output current at the maximumAs a rule of thumb, the component is always powered by a 16V volt supply.As long as the supply temperature is at least 7mA, the device will work.It is important that -40°C is warmer when it is being operated than when it is not.In this case, the maximum operating temperature is 125°C at this point.Unless the supply voltage is 20V, it cannot be used.The unit can only be powered by 10V volts.
NCP1605DR2G Features
NCP1605DR2G Applications
There are a lot of ON Semiconductor NCP1605DR2G PFC PMICs applications.
- 4WD transfercase
- PLL (Phase-Locked Loop)
- Smart manufacturing
- eBike
- Embedded systems
- Position detection
- DVD and CD-ROM drive
- TVS diodes
- Laboratory
- Decoupling circuit