Parameters |
Number of Outputs |
1 |
Output Type |
Transistor Driver |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Voltage - Supply (Vcc/Vdd) |
7.5V~20V |
Control Features |
Frequency Control |
Input Voltage (Min) |
9V |
Topology |
Buck |
Control Mode |
CURRENT/VOLTAGE-MODE |
Frequency - Switching |
280kHz |
Input Voltage (Max) |
20V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PUSH-PULL |
Clock Sync |
No |
Length |
4.9mm |
Width |
3.9mm |
RoHS Status |
Non-RoHS Compliant |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Operating Temperature |
0°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Terminal Finish |
TIN LEAD |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Time@Peak Reflow Temperature-Max (s) |
30 |
JESD-30 Code |
R-PDSO-G8 |
Function |
Step-Down |
NCP1575DR2 Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 7.5V~20V is the supply voltage and the operating voltage of the dc control. Suitable for work in a 0°C~125°C TJ dc switcher. There is a switch at 280kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. The 8 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is recommended to use 9V as the minimum input voltage of dc dc voltage regulator. At most, the dc to dc regulator accepts 20V input voltage.
NCP1575DR2 Features
Transistor Driver Outputs
Switching Frequency: 280kHz
Frequency Control
PULSE WIDTH MODULATION
NCP1575DR2 Applications
There are a lot of Rochester Electronics, LLC NCP1575DR2 DC to DC converter applications.
- Network technology
- Planers
- CMM
- Electrical power transmission
- Lathes
- Serial communication converter
- Linear guide
- Television equipment
- Communication system
- Shearing machines