NCP1395BPG
| Parameters | |
|---|---|
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 8.3V |
| Topology | Half-Bridge |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | RESONANT CONTROL |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.11MHz |
| Internal Switch(s) | No |
| Fault Protection | Over Temperature, Over Voltage |
| Max Duty Cycle | 52 % |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.3V |
| Height | 3.56mm |
| Length | 19.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | NCP1395 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 2.3mA |
| Voltage - Supply (Vcc/Vdd) | 9.3V~20V |
NCP1395BPG Overview
The ac to dc converter is embedded in 16-DIP (0.300, 7.62mm) package.The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.When the switching frequency reaches 50kHz~1MHz , the circuit is closed.A range of 9.3V~20V supply voltages (Vcc/Vdd) can be used.There are a total of 16 terminations in it.Approximately 16 pins are present on the ac/dc converter.The ac-dc converter has 16 pins.It is suitable for mounting by Through Hole .It is possible to search for similar acdc converters by using the NCP1395 family.There are 2 outputs to be run.AC to DC converter is contained in Switching Regulator or Controllers .When the supply voltage is 20V , the interface IC conducts.Its max frequency is 1.11MHz .
NCP1395BPG Features
Packaged with 16-DIP (0.300, 7.62mm)
Switching Frequency at 50kHz~1MHz
With 16 pins
Operating Supply Voltage at the range of 20V
NCP1395BPG Applications
There are a lot of ON Semiconductor NCP1395BPG AC DC Converters applications.
- Digital cameras
- AC--DC Adapter
- Standby and Auxiliary Power Supplies
- Automotive Telematics
- Chargers for cell/cordless phones
- Air Conditioning
- AC/DC Adaptors/Chargers for Cell Phones
- Home Appliance Applications
- Appliances
- Set-top boxes