NCP1395APG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | NCP1395 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 2.3mA |
| Voltage - Supply (Vcc/Vdd) | 9.3V~20V |
| Control Features | Frequency Control, Soft Start |
| Topology | Half-Bridge |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | RESONANT CONTROL |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 11V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Over Temperature, Over Voltage |
| Max Duty Cycle | 52 % |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.3V |
| Height Seated (Max) | 4.44mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1395APG Overview
16-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .A AC/DC converter of this type is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.When the switching frequency reaches 50kHz~1MHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 9.3V~20V , the AC/DC converter may be used.In total, it has 16 terminations.In this ac/dc converter, there are 16 pins.There are 16 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .A similar acdc converter can be searched by using the NCP1395 family.A total of 1 outputs are to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is able to reach high efficiency when its frequency is 1MHz .SVHC for REACH can be found in the standard No SVHC .
NCP1395APG Features
Packaged with 16-DIP (0.300, 7.62mm)
Switching Frequency at 50kHz~1MHz
With 16 pins
NCP1395APG Applications
There are a lot of ON Semiconductor NCP1395APG AC DC Converters applications.
- AC?DC USB chargers for Tablets
- SMPS house keeping power supplies
- Cleaners
- Switching AC-DC Charger
- MPS parts
- Automotive Infotainment
- Laptops and personal digital assistants
- PDAs
- Cellular phone chargers
- Universal Off-Line Power Supplies