NCP1351ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 22 Weeks |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1351 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8.9V~28V |
| Max Supply Current | 20mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 90ns |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 12V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Power, Short Circuit |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 18V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1351ADR2G Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.The AC/DC power converter type is Tape & Reel (TR) .This AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -25°C~125°C TJ °C in order for it to perform properly.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.A range of 8.9V~28V supply voltages (Vcc/Vdd) can be used.It has a total of 8 terminations.A ac/dc converter with 8 pins is available.The pins of the ac-dc converter count up to 8 .It is suitable for mounting by Surface Mount .The NCP1351 family allows you to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 400mA for the output current.It produces a voltage of 20V .When operating at a frequency of 65kHz , AC to DC converter is capable of reaching high efficiency.You are able to read the REACH SVHC standard at: No SVHC .There is a maximum supply current of 20mA that AC to DC converter can handle.
NCP1351ADR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 400mA
NCP1351ADR2G Applications
There are a lot of ON Semiconductor NCP1351ADR2G AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Tablets
- Cleaners
- Universal input AC/DC adapters (15W - 45W)
- Battery chargers for media tablets
- AC/DC Adaptors/Chargers for Cell Phones
- Remotely-controlled appliances
- Battery chargers for mobile devices with touchpad display
- Low-Voltage I/O System Power
- AC?DC USB chargers for Tablets