NCP1271P100G
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | Soft-Skip™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1271 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 10V~20V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1271P100G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.Switching frequency reaches 100kHz Hz.Vcc/Vdd can be used within the range of 10V~20V supply voltage.There are a total of 7 terminations in it.Approximately 7 pins are present on the ac/dc converter.A total of 7 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .It is a member of Soft-Skip? manufacturer family.The NCP1271 family can be used to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The following ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 800mA .This AC/DC converter produces a voltage of 20V as its output.
NCP1271P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 800mA
NCP1271P100G Applications
There are a lot of ON Semiconductor NCP1271P100G AC DC Converters applications.
- Digital cameras
- Battery chargers for media tablets
- Consumer electronics
- Home appliances
- Adaptors for DSCs
- MP3
- RCC SMPS
- Low-Voltage I/O System Power
- Battery chargers for cordless
- Universal input AC/DC adapters (15W - 45W)