NCP1271D65R2G
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | Soft-Skip™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1271 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 100mA |
| Power Dissipation | 100mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10V~20V |
| Max Supply Current | 3.5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 14V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Voltage, Short Circuit |
| Max Duty Cycle | 86 % |
| Input Current | 100mA |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1271D65R2G Overview
The ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.The AC/DC power converter Tape & Reel (TR) is available for this product.The AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.A range of 10V~20V supply voltages (Vcc/Vdd) can be used.There have been 7 terminations of this program.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.Surface Mount are the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the Soft-Skip? manufacturer family.If you select the NCP1271 family, you will be able to search similar acdc converters.A total of 1 outputs are to be processed.Switching Regulator or Controllers contains the ac to dc conversions.500mA is set as the output current.There is 20V output voltage from this AC/DC converter.This power AC DC is capable of reaching high efficiency when operating at a frequency of 65kHz .REACH SVHC standard can be found at No SVHC .Supply currents up to 3.5mA can be handled by this power AC DC.
NCP1271D65R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 7 pins
Output Current at 500mA
NCP1271D65R2G Applications
There are a lot of ON Semiconductor NCP1271D65R2G AC DC Converters applications.
- Standby power supplies for VCR
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Linear Adapter Replacements
- IoT Applications
- Cellular phone chargers
- Appliances
- Off--line Battery Charger
- Power Adaptors
- AC--DC Adapter
- Power tools