NCP1252CDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 500kHz |
| Base Part Number | NCP1252 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.4mA |
| Voltage - Supply (Vcc/Vdd) | 9V~28V |
| Max Supply Current | 20mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 9.6V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 26ns |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 80 % |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Start Up | 10V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1252CDR2G Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.The AC/DC power converter Tape & Reel (TR) is available for this product.A AC/DC converter of this type is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -25°C~125°C TJ °C in order for it to perform properly.This AC DC converter employs SWITCHING CONTROLLER analog IC type.As soon as the switching frequency reaches Up to 500kHz , the circuit is closed.This AC/DC converter is suitable for operation in the range of 9V~28V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.It contains 8 pins.There are 8 pins in the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.If you select the NCP1252 family, you will be able to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions can be found in Switching Regulator or Controllers .The output voltage of the AC/DC converter is 12V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 500kHz .You are able to read the REACH SVHC standard at: No SVHC .During a 15V -voltage supply, the interface IC conducts.There is a maximum current limAC to DC converter of 20mA for the supply.
NCP1252CDR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 500kHz
With 8 pins
Operating Supply Voltage at the range of 15V
NCP1252CDR2G Applications
There are a lot of ON Semiconductor NCP1252CDR2G AC DC Converters applications.
- Laptops and personal digital assistants
- Automotive Clusters
- Automotive Infotainment
- Switching AC-DC Charger
- Off--line Battery Charger
- Automotive Telematics
- Low-Voltage I/O System Power
- Adapter for ADSL
- Standby Power for General Off-Line Applications
- Home appliances