NCP1230P65G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1230 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Max Supply Current | 5.6mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 15 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1230P65G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.A range of 7.7V~18V supply voltages (Vcc/Vdd) can be used.There have been 7 terminations of this program.It contains 7 pins.The pins of the ac-dc converter total to 7 .Suitable mounting is provided by Through Hole .If you select the NCP1230 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .500mA is set as the output current.The output voltage of the AC/DC converter is 18V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 65kHz .It is also possible to determine PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE using this ACDC converter.AC to DC converter is capable of handling a maximum supply current of 5.6mA A.
NCP1230P65G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 500mA
NCP1230P65G Applications
There are a lot of ON Semiconductor NCP1230P65G AC DC Converters applications.
- Universal input AC/DC adapters (15W - 45W)
- Dimmers
- Adapters
- Small off-line low voltage power supplies
- AC?DC USB chargers for Cell Phones
- Battery Chargers
- AC?DC USB chargers for Tablets
- Switching AC-DC Charger
- Appliance Power Supplies
- Cellular phone chargers