NCP1230P65
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| Terminal Finish | TIN LEAD |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
| Input Voltage (Min) | 8.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1230P65 Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.As soon as the switching frequency reaches 65kHz , the circuit is closed.This AC/DC converter is suitable for operation in the range of 7.7V~18V supply voltage (Vcc/Vdd).As a result, it has had 7 terminations.The pins of the ac-dc converter total to 7 .Ac to dc inverters can be powered by up to 0.5A current.It is also possible to determine PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE using this ACDC converter.
NCP1230P65 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
NCP1230P65 Applications
There are a lot of Rochester Electronics, LLC NCP1230P65 AC DC Converters applications.
- Standby Power Supplies
- Power adapters for network devices
- Set Top Boxes (STB)
- Switching AC-DC Adapter
- LED lights
- WiFi Wireless
- Dimmers
- Battery chargers for smart phones
- DVD players
- Digital cameras