NCP1230D165R2G
| Parameters | |
|---|---|
| Input Voltage (Min) | 8.4V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 85 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.6V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1230 |
| Pin Count | 7 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.8mA |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 7.7V~18V |
NCP1230D165R2G Overview
In the package 8-SOIC (0.154, 3.90mm Width), 7 Leads , the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.It can be used within the range of 7.7V~18V supply voltage (Vcc/Vdd).There have been 8 terminations of this program.A ac/dc converter with 7 pins is available.There are 7 pins in the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.If you select the NCP1230 family, you will be able to search for similar acdc converters.The number of outputs to run is 1 .Switching Regulator or Controllers contains the ac to dc conversions.Current output is set to 800mA .This AC/DC converter produces a voltage of 18V as its output.The power AC DC is capable of high efficiency when operated at a frequency of 65kHz .When utilizing this ACDC converter, PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE can also be discovered.
NCP1230D165R2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 7 pins
Output Current at 800mA
NCP1230D165R2G Applications
There are a lot of ON Semiconductor NCP1230D165R2G AC DC Converters applications.
- Humidifier
- Adapter/Charger for Cell
- Industrial controls
- Automotive Telematics
- Switching AC-DC Adapter
- Adapters for Handheld Electronics
- Battery chargers for media tablets
- Power adapters for network devices
- Power Adaptors
- Standby power