NCP1217P65
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 74% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1217P65 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter Tube is available for this product.This AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of 0°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.The switching frequency reaches 65kHz .Vcc/Vdd can be used within the range of 7.6V~16V supply voltage.In total, there are 7 terminations.There are 8 pins on the ac-dc converter.Ac to dc inverters can only be powered at a maximum current of 0.5A .
NCP1217P65 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
NCP1217P65 Applications
There are a lot of Rochester Electronics, LLC NCP1217P65 AC DC Converters applications.
- Charger
- Battery chargers for cordless
- Consumer electronics
- RCC SMPS
- Low power ac?dc Adapters for Chargers
- Battery chargers for mobile devices with touchpad display
- Standby Power Supplies
- Switching AC-DC Adapter
- Set Top Boxes (STB)
- AC-DC Output Power Conversion Applications