NCP1217P133
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 133kHz |
| Base Part Number | NCP1217 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 74% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1217P133 Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The ac dc converter is available in Tube case.There is a mounting point for this AC/DC converter in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of 0°C~150°C TJ degrees Celsius.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.Within the range of 7.6V~16V supply voltage (Vcc/Vdd), it can be used.A total of 7 terminations have been recorded.The pins of the ac-dc converter total to 8 .If you select the NCP1217 family, you will be able to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .When operating at a frequency of 133kHz , AC to DC converter is capable of reaching high efficiency.Currently, the maximum current that the ac to dc inverter can take is 0.5A .
NCP1217P133 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
NCP1217P133 Applications
There are a lot of ON Semiconductor NCP1217P133 AC DC Converters applications.
- AC/DC Adaptors/Chargers for PDAs
- AC/DC LED Driver applications
- Power Adaptors
- Smartphones
- White goods
- RCC SMPS
- Power tools
- Portable audio
- USB-PD 2.0
- AC?DC USB chargers for Cameras