NCP1217AP100G
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | LIFETIME (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1217 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.02mA |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Input Voltage (Min) | 8.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 50 % |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1217AP100G Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of 0°C~150°C TJ °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.100kHz is the switching frequency.A range of 7.6V~16V supply voltages (Vcc/Vdd) can be used.In total, it has 8 terminations.The ac/dc converter has a total of 7 pins.The pins of the ac-dc converter count up to 7 .The ac dc converters is suitable for mounting by Through Hole .The NCP1217 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 500mA .
NCP1217AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 500mA
NCP1217AP100G Applications
There are a lot of ON Semiconductor NCP1217AP100G AC DC Converters applications.
- Home Appliance Applications
- Auxiliary Power Supply
- Industrial controls
- Power tools
- Battery chargers for cellular phones
- Small off-line low voltage power supplies
- Battery chargers for mobile devices with touchpad display
- Adapters
- Standby and Auxiliary Power Supplies
- AC/DC Adaptors/Chargers for Cordless Phone