NCP1216AP133
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Input Voltage (Min) | 11V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 133kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1216AP133 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.The AC/DC power converter type is Tube .Through Hole mounts this AC/DC converter.The ac dc converter needs to be operated at 0°C~150°C TJ °C in order to perform.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.133kHz is the switching frequency.As long as the supply voltage (Vcc/Vdd) is within the range of 10V~16V , the AC/DC converter may be used.A total of 7 terminations have been recorded.In this ac-dc converter, there are 8 pins.An amount of current of 0.5A can be supplied to the ac to dc inverter.
NCP1216AP133 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 133kHz
NCP1216AP133 Applications
There are a lot of Rochester Electronics, LLC NCP1216AP133 AC DC Converters applications.
- Adapter/Charger for Cell
- Lighting controls
- Home Appliance Applications
- Wall switches
- Adapters
- Standby Power Supplies
- AC-DC Output Power Conversion Applications
- Auxiliary Power Supply
- Replacements for bulky plug-in transformers
- Z-Wave