NCP1216AP100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1216 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10V~16V |
| Input Voltage (Min) | 11V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 46.5% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1216AP100 Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of 0°C~150°C TJ °C in order to achieve its full performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.When the switching frequency reaches 100kHz , the circuit is closed.A range of 10V~16V supply voltages (Vcc/Vdd) can be used.It has a total of 7 terminations.There are 8 pins in the ac-dc converter.The NCP1216 family allows you to search for similar acdc converters.The ac to dc conversions are included in Switching Regulator or Controllers .It is possible to supply the ac to dc inverter with a maximum current of 0.5A .
NCP1216AP100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
NCP1216AP100 Applications
There are a lot of ON Semiconductor NCP1216AP100 AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Battery chargers for mobile devices with touchpad display
- Automotive Telematics
- Appliances
- Battery chargers for cordless
- MPS parts
- Small off-line low voltage power supplies
- AC?DC USB chargers for Cell Phones
- Automotive Infotainment
- MP3