NCP1207PG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1207 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 10.6V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.5A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 150kHz |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
NCP1207PG Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.It can be used within the range of 10.6V~16V supply voltage (Vcc/Vdd).A total of 8 terminations have been recorded.In this ac-dc converter, there are 8 pins.A similar acdc converter can be searched by using the NCP1207 family.AC to DC converter is included in Switching Regulator or Controllers .Ac to dc inverters can be supplied with a maximum current of 0.5A .
NCP1207PG Features
Packaged with 8-DIP (0.300, 7.62mm)
NCP1207PG Applications
There are a lot of ON Semiconductor NCP1207PG AC DC Converters applications.
- Replacements for bulky plug-in transformers
- AC--DC Adapter
- Adaptors for DSCs
- Adapter/Charger for Cell
- Cleaners
- Vacuum Cleaner
- Battery Chargers
- Low-Voltage I/O System Power
- Automotive Clusters
- Handheld/Battery-Powered Systems