NCP1203P40
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | SMARTMOS™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1203 |
| Pin Count | 8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 7.8V~16V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.25A |
| Frequency - Switching | 40kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Breakdown Voltage | 500V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.8V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1203P40 Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .The AC/DC power converter type is Tube .There is a AC/DC converter mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.As soon as the switching frequency reaches 40kHz , the circuit is closed.Vcc/Vdd can be used within the range of 7.8V~16V supply voltage.Total terminations are 8 .There are 8 pins on this ac/dc converter.There are 8 pins on the ac-dc converter.It is a member of SMARTMOS? manufacturer family.Similar acdc converters can be found using the NCP1203 family.Switching Regulator or Controllers includes the ac to dc conversions.Currently, the maximum current that the ac to dc inverter can take is 0.25A .
NCP1203P40 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 40kHz
With 8 pins
NCP1203P40 Applications
There are a lot of ON Semiconductor NCP1203P40 AC DC Converters applications.
- Power tools
- Shaver Charger
- Battery Chargers
- Charger
- Standby Power for General Off-Line Applications
- Open Frame Switching Power Supply
- MPS parts
- 3.3V power supplies
- Appliances
- Power adapters for network devices