NCP1201P60G
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1201 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 116ns |
| Fall Time (Typ) | 41 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 83 % |
| Duty Cycle | 83% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 500V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
NCP1201P60G Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.The AC/DC converter is capable of being used when the supply voltage is 16V Max (Vcc/Vdd).There are a total of 8 terminations.The ac/dc converter has a total of 8 pins.A total of 8 pins are present on the ac-dc converter.Similar acdc converters can be found using the NCP1201 family.The number of outputs to run is 1 .There are a ac to dc conversions included in Switching Regulator or Controllers .250mA is set as the output current.There is 6.5V voltage output from it.When operating at a frequency of 60kHz , AC to DC converter is capable of reaching high efficiency.During a 16V -voltage supply, the interface IC conducts.
NCP1201P60G Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1201P60G Applications
There are a lot of ON Semiconductor NCP1201P60G AC DC Converters applications.
- Home Appliance Applications
- 3.3V power supplies
- ZigBee
- Air conditioners
- Adapters for Handheld Electronics
- Battery Chargers
- IoT Applications
- White goods
- Portable audio
- Power tools