NCP1201P100G
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1201 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 116ns |
| Fall Time (Typ) | 41 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 83 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 500V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1201P100G Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.As a result, the switching frequency reaches 100kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 16V Max , the AC/DC converter may be used.As a result, it has had 8 terminations.A ac/dc converter with 8 pins is available.There are 8 pins in total.Similar acdc converters can be found using the NCP1201 family.AC to DC converter is necessary to run 1 outputs.Switching Regulator or Controllers includes the ac to dc conversions.Current output is set to 250mA .The voltage output by this AC/DC converter is 6.5V .Interface ICs conduct when the supply voltage is 16V .
NCP1201P100G Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1201P100G Applications
There are a lot of ON Semiconductor NCP1201P100G AC DC Converters applications.
- Handheld/Battery-Powered Systems
- Power Adaptors
- Power tools fast chargers with trickle and on/off
- Standby power
- Industrial controls
- LED lights
- Dimmers
- Humidifier
- Battery Chargers
- Automotive Clusters