NCP1200P40G
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 550mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 40kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Voltage |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1200P40G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.In this case, the AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -25°C~125°C TJ degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .Vcc/Vdd can be used within the range of 16V Max supply voltage.A total of 8 terminations have been recorded.On this ac/dc converter, there are 8 pins.The pins of the ac-dc converter total to 8 .The ac dc converters is suitable for mounting by Through Hole .The NCP1200 family can be used to search for similar acdc converters.There are 1 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .250mA is set as the output current.When operating at a frequency of 40kHz , AC to DC converter is capable of reaching high efficiency.In the following link, you will find the REACH SVHC standard: No SVHC .Voltage is the output it is configured with.
NCP1200P40G Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
Output Type : Voltage
NCP1200P40G Applications
There are a lot of ON Semiconductor NCP1200P40G AC DC Converters applications.
- Auxiliary Power Supplies
- Portable Apparatus
- Consumer electronics
- Battery Chargers
- AC/DC LED Driver applications
- DVD players
- Humidifier
- Laptops
- Adapter/Charger for Cordless Phones
- Home Appliance Applications