NCP1200P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | NCP1200 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 67ns |
| Fall Time (Typ) | 28 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Max Duty Cycle | 80 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1200P100 Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~125°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.A range of 16V Max supply voltages (Vcc/Vdd) can be used.In total, it has 8 terminations.The ac/dc converter has a total of 8 pins.Up to 8 pins are present on the ac-dc converter.The NCP1200 family can be used to search for similar acdc converters.There are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 250mA .When operating at a frequency of 100kHz , AC to DC converter is capable of reaching high efficiency.Interfacing ICs conduct when there is 16V supply voltage.
NCP1200P100 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 250mA
Operating Supply Voltage at the range of 16V
NCP1200P100 Applications
There are a lot of ON Semiconductor NCP1200P100 AC DC Converters applications.
- Smartphones
- LED lights
- Digital cameras
- 3.3V power supplies
- Handheld/Battery-Powered Systems
- AC--DC Adapter
- Dimmers
- Off--line Battery Charger
- Replaces linear transformers
- Standby and Auxiliary Power Supplies