NCP1200AP40
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 16V Max |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.25A |
| Frequency - Switching | 40kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Short Circuit |
| Duty Cycle | 83% |
| Output Isolation | Isolated |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1200AP40 Overview
In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of 0°C~125°C TJ degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.40kHz is the switching frequency.This AC/DC converter is suitable for operation in the range of 16V Max supply voltage (Vcc/Vdd).As a result, it has a total of 8 terminations.In this ac-dc converter, there are 8 pins.A maximum current of 0.25A may be supplied to the ac to dc inverter.
NCP1200AP40 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 40kHz
NCP1200AP40 Applications
There are a lot of Rochester Electronics, LLC NCP1200AP40 AC DC Converters applications.
- Standby power supplies for VCR
- Battery chargers for mobile devices with touchpad display
- AC?DC USB chargers for Cameras
- LED Driver
- ZigBee
- Portable Apparatus
- Set Top Boxes (STB)
- Wireless System
- USB type-c v1.2 chargers with optional VDM
- Standby and Auxiliary Power Supplies