NCP1090DBRG
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | HIPO™ |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Type | Controller (PD) |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1090 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 9.8V |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Output Current | 500mA |
| Power - Max | 12.95W |
| Max Output Voltage | 72V |
| Min Input Voltage | 0V |
| Max Input Voltage | 57V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 57V |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Standards | 802.3af (PoE) |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1090DBRG Overview
There is an embedded version of it in the Tape & Reel (TR) package.Packaged according to 8-TSSOP (0.173, 4.40mm Width).The type of this PoE controller is Controller (PD).It has been reported that the number of channels is growing strongly/weakly: 1.For a reliable operation, -40°C~85°C is the PoE operating temperature.In order to operate this electrical Po E controller, it requires a voltage of 0V~57V as a supply voltage.Base part numbers NCP1090 can be used to establish Po E controllers.In a 8 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.As far as the maximum power of this electrical ethernet over power controller is concerned, it is 12.95W Watts.There is a pin count of 8 on this ethernet over power controller.As you can see, it is designed with 8 pins.During the reflow process of this electrical ethernet power controller, Cel (peak reflow temperature) reaches NOT SPECIFIED.500mA possesses a high output current, which makes it possible for it to provide maximum design flexibility.This power over ethernet controller has an output voltage that is equal to 9.8V.A maximum input voltage of 57V can be applied to this power over ethernet PoE controller.There is a minimum input voltage of 0V which is required by this power over the ethernet controller.
NCP1090DBRG Features
Tape & Reel (TR) package
8 pin count
8 pins
The output current of 500mA
NCP1090DBRG Applications
There are a lot of ON Semiconductor NCP1090DBRG Power Over Ethernet (PoE) Controllers applications.
- Non-Compliant, Application Specific Devices
- VoIP Phones
- Power Modules
- Security Cameras
- Pass-through System
- Routers
- IEEE 802.3bt (Draft) Compliant Devices
- High Power Wireless Data Systems
- Power over Ethernet
- Single-Port PSE End-Point Applications