NCP1075P130G
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 130kHz |
| Base Part Number | NCP1075 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Voltage | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
NCP1075P130G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter Tube is available for this product.Through Hole mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As long as the supply voltage (Vcc/Vdd) is within the range of 6.3V~10V , the AC/DC converter may be used.In total, it has 7 terminations.Approximately 7 pins are present on the ac/dc converter.There are 7 pins in total.The ac dc converters are suitable to mount by Through Hole .Based on the NCP1075 family, you can search for similar acdc converters.There are 1 outputs to be processed.AC to DC converter is contained in Switching Regulator or Controllers .There is 450mA output current set.High efficiency can be achieved when AC to DC converters frequency is set to 130kHz .SVHC for REACH can be found in the standard No SVHC .Input voltage for the AC to DC converter is available under 265V .If the input voltage is less than 85V V, the AC to DC inverter can be used.
NCP1075P130G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 450mA
NCP1075P130G Applications
There are a lot of ON Semiconductor NCP1075P130G AC DC Converters applications.
- AC/DC Adaptors/Chargers for Cordless Phone
- Adapters for Handheld Electronics
- Standby Power Supplies
- Tablets
- Laptops
- Networking
- AC?DC USB chargers for Cameras
- Charger
- Standby power supplies for VCR
- Z-Wave