NCP1072P065G
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1072 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 250mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Output Power | 19W |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 230V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1072P065G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches 65kHz , the process is complete.The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).A total of 7 terminations have been recorded.On the ac/dc converter, there are 7 pins.There are 7 pins in total.Through Hole is the recommended mounting method for the ac dc converters.If you select the NCP1072 family, you will be able to search similar acdc converters.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 250mA .Here is the standard for REACH SVHC : No SVHC .Input voltages under 10V can be used to power the AC to DC converter.There is 19W output power generated by a coverter.A voltage of less than -300mV V can be used with the AC to DC inverter.Input voltage (AC) should be below 250V .There is a Adjustable output configured.
NCP1072P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 250mA
Output Type : Adjustable
NCP1072P065G Applications
There are a lot of ON Semiconductor NCP1072P065G AC DC Converters applications.
- Rice Cooker
- Chargers for cell/cordless phones
- Vacuum Cleaner
- Home appliances
- IoT Applications
- Consumer electronics
- Adapter/Charger for Cordless Phones
- Standby power supplies for IR
- Industrial controls
- Lighting controls