NCP1071STAT3G
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 14W |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.6V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1071STAT3G Overview
This ac to dc converter is included in the package TO-261-4, TO-261AA .There is a AC/DC power converter of Tape & Reel (TR) available.It is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.When the switching frequency reaches 65kHz , the circuit is closed.The voltage range of the supply can be set to 6.3V~10V (Vcc/Vdd).A total of 4 terminations have been recorded.There are 4 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Surface Mount .The following ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 350mA for the output current.You may read the REACH SVHC standard at No SVHC .The AC to DC converter input voltage can be powered under 265V .An input voltage of less than 85V V is required to operate the AC to DC inverter.An interface IC conducts when its supply voltage is 8.6V .Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
NCP1071STAT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
Output Current at 350mA
Operating Supply Voltage at the range of 8.6V
NCP1071STAT3G Applications
There are a lot of ON Semiconductor NCP1071STAT3G AC DC Converters applications.
- Consumer electronics
- Standby power
- Adapter/Charger for Cell
- Auxiliary Power Supplies
- Adaptors for DSCs
- Adapters for Handheld Electronics
- Automotive Infotainment
- Switching AC-DC Charger
- WiFi Wireless
- Power Adaptors