NCP1071P065G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 14W |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.6V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1071P065G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.This AC DC converter employs SWITCHING CONTROLLER analog IC type.When the switching frequency reaches 65kHz , the process is complete.Vcc/Vdd can be used within the range of 6.3V~10V supply voltage.There are a total of 7 terminations.On the ac/dc converter, there are 7 pins.The ac dc converters is suitable for mounting by Through Hole .The ac to dc conversions are included in Switching Regulator or Controllers .350mA is set as the output current.SVHC for REACH can be found in the standard No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .The AC to DC inverter may be operated with an input voltage less than 85V volts.At 8.6V supply voltage, the interface IC conducts.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
NCP1071P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 350mA
Operating Supply Voltage at the range of 8.6V
NCP1071P065G Applications
There are a lot of ON Semiconductor NCP1071P065G AC DC Converters applications.
- Standby Power Supplies
- SMPS house keeping power supplies
- Air Conditioning
- Open Frame Switching Power Supply
- Universal Off-Line Power Supplies
- DVD players
- Wireless System
- Standby Power for General Off-Line Applications
- Auxiliary Power Supply
- Wall switches