NCP1070P100G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.6V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Height Seated (Max) | 5.33mm |
| Length | 9.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1070P100G Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.Tube case is available for the ac dc converter.Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.In this AC to DC transformer, the switching frequency is 100kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 6.3V~10V , the AC/DC converter may be used.Total terminations are 7 .On the ac/dc converter, there are 7 pins.It are possible to mount thare ac dc converters by Through Hole .The ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 250mA .Interface ICs conduct when the supply voltage is 8.6V .
NCP1070P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 250mA
Operating Supply Voltage at the range of 8.6V
NCP1070P100G Applications
There are a lot of ON Semiconductor NCP1070P100G AC DC Converters applications.
- AC?DC USB chargers for Cell Phones
- Standby power supplies for VCR
- Standby Power Supplies
- Low power ac?dc Adapters for Chargers
- Power tools
- Digital cameras
- Dimmers
- WiFi Wireless
- Vacuum Cleaner
- Home appliances