NCP1063AP100G
| Parameters | |
|---|---|
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 9V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Power Rating | 7.8W |
| Max Power Dissipation | 15.5W |
| Max Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 7V~20V |
| Topology | Buck, Flyback |
| Min Input Voltage | -300mV |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 20V |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Power, Over Temperature, Short Circuit |
| Duty Cycle | 66% |
| Output Isolation | Either |
NCP1063AP100G Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .As soon as the switching frequency reaches 100kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 7V~20V , the AC/DC converter may be used.There are 7 pins on this ac/dc converter.Through Hole is a suitable mounting point for the ac dc converters.You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 20V .It is possible to operate the AC to DC inverter with an input voltage that is less than -300mV V.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
NCP1063AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
NCP1063AP100G Applications
There are a lot of ON Semiconductor NCP1063AP100G AC DC Converters applications.
- Auxiliary Power Supply
- Battery Chargers
- Standby Power for General Off-Line Applications
- USB type-c v1.2 chargers with optional VDM
- AC/DC Adaptors/Chargers for PDAs
- Low-Voltage I/O System Power
- Adapter for ADSL
- AC/DC Adaptors/Chargers for Cordless Phone
- Charger
- USB-PD 2.0