NCP1060AP100G
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Power Rating | 4.7W |
| Max Power Dissipation | 8.3W |
| Max Output Current | 520mA |
| Voltage - Supply (Vcc/Vdd) | 7V~20V |
| Topology | Buck, Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Power, Over Temperature, Short Circuit |
| Duty Cycle | 66% |
| Output Isolation | Either |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 9V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1060AP100G Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.When the switching frequency reaches 60kHz , the process is complete.It can be used within the range of 7V~20V supply voltage (Vcc/Vdd).In this ac/dc converter, there are 7 pins.It are possible to mount thare ac dc converters by Through Hole .In the following link, you will find the REACH SVHC standard: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.An input voltage of less than 85V V is required to operate the AC to DC inverter.AC to DC power converters should be able to accept input voltages (AC) below 265V .
NCP1060AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
With 7 pins
NCP1060AP100G Applications
There are a lot of ON Semiconductor NCP1060AP100G AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Universal Off-Line Power Supplies
- Z-Wave
- Linear Adapter Replacements
- Automotive Infotainment
- Home Appliance Applications
- Automotive Clusters
- AC--DC Adapter
- Consumer electronics
- ZigBee