NCP1055P100G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1055 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 680mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 650μA |
| Output Current | 680mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Output Power | 20W |
| Max Output Voltage | 40V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Min Output Voltage | 0V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Max Duty Cycle | 77 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.5V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1055P100G Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter Tube is available for this product.In this case, the AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.As long as the supply voltage (Vcc/Vdd) is within the range of 7.5V~10V , the AC/DC converter may be used.There are a total of 8 terminations in it.The ac/dc converter has a total of 7 pins.The ac-dc converter has 7 pins.Suitable mounting is provided by Through Hole .If you select the NCP1055 family, you will be able to search similar acdc converters.There are 1 outputs to be processed.Switching Regulator or Controllers contains the ac to dc conversions.It has been set to 680mA for the output current.As a result, its output voltage is 700V .A high efficiency can be achieved by operating at a frequency of 100kHz .In the following link, you will find the REACH SVHC standard: No SVHC .It is available to power the AC to DC converter input voltage under 265V .20W is the output power of a coverter.Input voltages less than 85V volts can be used to operate the AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
NCP1055P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 680mA
NCP1055P100G Applications
There are a lot of ON Semiconductor NCP1055P100G AC DC Converters applications.
- Set-top boxes
- Adapter for ADSL
- Lighting controls
- White goods
- AC--DC Adapter
- Set -Top Box (STB) Power Supply
- Battery Chargers
- MP3
- Auxiliary Power Supply
- Battery chargers for smart phones