NCP1053ST100T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1053 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1053ST100T3 Overview
An embedded ac to dc converter is included in TO-261-4, TO-261AA package.In Tape & Reel (TR) AC/DC power converter, it is available.It is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.A range of 7.5V~10V supply voltages (Vcc/Vdd) can be used.As a result, it has had 4 terminations.A ac/dc converter with 4 pins is available.There are 4 pins in total.The NCP1053 family allows you to search for similar acdc converters.A total of 1 outputs need to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .A high efficiency is achieved when operating at a frequency of 100kHz .On the basis of a unique technique, the input voltage can be ensured to be 8.5V .An amount of current of 2A can be supplied to the ac to dc inverter.
NCP1053ST100T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1053ST100T3 Applications
There are a lot of ON Semiconductor NCP1053ST100T3 AC DC Converters applications.
- Open Frame Switching Power Supply
- 3.3V power supplies
- Adapter for ADSL
- Humidifier
- AC/DC Adaptors/Chargers for PDAs
- Battery chargers for cordless
- LED lights
- Air conditioners
- Portable audio
- USB type-c v1.2 chargers with optional VDM