NCP1052P44
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1052 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 450μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1052P44 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.Within the range of 7.5V~10V supply voltage (Vcc/Vdd), it can be used.There are a total of 8 terminations in it.It contains 8 pins.A total of 8 pins are present on the ac-dc converter.The NCP1052 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .A high efficiency can be achieved by operating at a frequency of 44kHz .In theory, the maximum current that can be supplied to the ac to dc inverter is 2A .Quiescent current is consumed at 450μA .
NCP1052P44 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
NCP1052P44 Applications
There are a lot of ON Semiconductor NCP1052P44 AC DC Converters applications.
- Open Frame Switching Power Supply
- Adapter for ADSL
- Linear Adapter Replacements
- Appliances
- MPS parts
- Replaces linear transformers
- Vacuum Cleaner
- Standby power supplies for TV
- Air conditioners
- AC--DC Adapter