NCP1052P136
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Power (Watts) | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Output Current-Max | 2A |
| Frequency - Switching | 136kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1052P136 Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 136kHz , the circuit is closed.This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.There are a total of 8 pins on the ac-dc converter.Using a unique technique, a voltage with a maximum value of 8.5V can be ensured.In theory, the maximum current that can be supplied to the ac to dc inverter is 2A .
NCP1052P136 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 136kHz
NCP1052P136 Applications
There are a lot of Rochester Electronics, LLC NCP1052P136 AC DC Converters applications.
- Vacuum Cleaner
- RCC SMPS
- Wall switches
- Auxiliary Power Supply
- Standby and Auxiliary Power Supplies
- Off--line Battery Charger
- Switching AC-DC Adapter
- Consumer electronics
- Standby power supplies for IR
- Auxiliary Power Supplies