NCP1051P44
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Power (Watts) | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Output Current-Max | 2A |
| Frequency - Switching | 44kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1051P44 Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 44kHz .It can be used within the range of 7.5V~10V supply voltage (Vcc/Vdd).There are a total of 8 terminations.There are 8 pins in the ac-dc converter.Based on a unique technique, the input voltage can be ensured to have the maximal value of 8.5V .Currently, the maximum current that the ac to dc inverter can take is 2A .
NCP1051P44 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 44kHz
NCP1051P44 Applications
There are a lot of Rochester Electronics, LLC NCP1051P44 AC DC Converters applications.
- Lighting controls
- Home Appliance Applications
- Automotive Telematics
- 3.3V power supplies
- Adaptors for DSCs
- Standby Power Supply
- Adaptors for Portable Media Player
- Battery Chargers
- AC/DC Adaptors/Chargers for PDAs
- Charger