NCP1012AP133
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| Terminal Finish | TIN LEAD |
| Power (Watts) | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1012AP133 Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.It is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .Switching frequency reaches 130kHz Hz.It can be used within the range of 8.5V~10V supply voltage (Vcc/Vdd).In total, it has 7 terminations.A total of 8 pins are present on the ac-dc converter.Ac to dc inverters can be supplied with a maximum current of 1A .
NCP1012AP133 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 130kHz
NCP1012AP133 Applications
There are a lot of Rochester Electronics, LLC NCP1012AP133 AC DC Converters applications.
- Off--line Battery Charger
- RCC SMPS
- Power adapters for network devices
- White goods
- Z-Wave
- Replaces linear transformers
- Networking
- AC?DC USB chargers for Cameras
- Battery Chargers
- Standby power supplies for IR