NCP1011ST65T3G
| Parameters | |
|---|---|
| Factory Lead Time | 32 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1011 |
| Pin Count | 4 |
| Max Output Current | 250mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1011ST65T3G Overview
This ac to dc converter is embedded in package TO-261-4, TO-261AA .It is available in Tape & Reel (TR) AC/DC power converter.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.As a result, the switching frequency reaches 65kHz .The voltage range of the supply can be set to 8.5V~10V (Vcc/Vdd).There are a total of 4 terminations in it.A ac/dc converter with 4 pins is available.The ac-dc converter has 4 pins.Suitable mounting is provided by Surface Mount .Similar acdc converters can be found using the NCP1011 family.The following ac to dc conversions are contained in Switching Regulator or Controllers .
NCP1011ST65T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
NCP1011ST65T3G Applications
There are a lot of ON Semiconductor NCP1011ST65T3G AC DC Converters applications.
- LED Driver
- AC/DC Adaptors/Chargers for Cordless Phone
- Set Top Boxes (STB)
- Cleaners
- Auxiliary Power Supply
- White goods
- Battery chargers for cordless
- Power adapters for network devices
- Battery chargers for smart phones
- Rice Cooker