NCP1010AP100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1010 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1010AP100 Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 100kHz , the process is complete.This AC/DC converter is suitable for operation in the range of 8.5V~10V supply voltage (Vcc/Vdd).Total terminations are 7 .It contains 7 pins.The ac-dc converter has 8 pins.It is possible to search for similar acdc converters by using the NCP1010 family.The following ac to dc conversions are contained in Switching Regulator or Controllers .In theory, the maximum current that can be supplied to the ac to dc inverter is 0.55A .When the supply voltage is 10V , the interface IC may conduct.
NCP1010AP100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Operating Supply Voltage at the range of 10V
NCP1010AP100 Applications
There are a lot of ON Semiconductor NCP1010AP100 AC DC Converters applications.
- Standby Power for General Off-Line Applications
- 3.3V power supplies
- Adapter/Charger for Cell
- Z-Wave
- Records
- Power Adaptors
- AC?DC USB chargers for Cameras
- Battery chargers for mobile devices with touchpad display
- AC?DC USB chargers for Tablets
- Switching AC-DC Charger