NCL30086BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Max Output Current | 500mA |
| Max Supply Voltage | 20V |
| Output Current | 3A |
| Max Output Voltage | 200V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 9.4V |
| Max Input Voltage | 26V |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Voltage - Supply (Min) | 8.8V |
| Nominal Input Voltage (DC) | 12V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCL30086BDR2G Overview
The 10-SOP (0.154, 3.90mm Width) package conserves board space. The LED driver's design uses 1 outputs.It adopts the way of Surface Mount for mounting.The system emerges as a AC DC Offline Switcher with high efficiency.If the led driver ic is set to -40°C~125°C TA, it will work normally.The benefits it provides to Lighting are considerable.It operates with 10 terminations.This LED driver is configured with a base of 8 pins.A voltage supply below 8.8V may cause undetermined failures.I have mounted it by Surface Mount.The voltage of 20V is acceptable.According to its characteristics, it is also classified into Display Drivers.With a minimum input voltage of 9.4V volts, it can operate.Supply current is limited to 26V at its maximum value.The load is capable of receiving 3A current.When operating with a maximum output current of 500mA, it can deliver all the benefits of a LED driver.There is 200V voltage output from it.Voltages above 200V should not be allowed.
NCL30086BDR2G Features
Available in the 10-SOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 12V
Output voltage of 200V
NCL30086BDR2G Applications
There are a lot of ON Semiconductor NCL30086BDR2G LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Replacement lamps
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
- Stage and Studio lighting
- A- lamps
- LED Lightings for Industrial Equipment