NCL30060BDR2G
| Parameters | |
|---|---|
| Weight | 254.011727mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 14V |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Max Output Current | 400mA |
| Operating Supply Voltage | 14V |
| Max Supply Voltage | 28V |
| Output Current | 400mA |
| Max Supply Current | 20mA |
| Max Output Voltage | 14V |
| Topology | Flyback, Step-Down (Buck) |
| Min Input Voltage | 10.7V |
| Max Input Voltage | 12.8V |
| Rise Time | 180ns |
| Fall Time (Typ) | 80 ns |
| Min Output Voltage | 10V |
| Internal Switch(s) | No |
| Voltage - Supply (Min) | 8.8V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
NCL30060BDR2G Overview
Using its 8-SOIC (0.154, 3.90mm Width), 7 Leads package, it is possible to save board space. As part of the design of this LED driver, there are 1 outputs that have been used.The mounting method adopted is Surface Mount.As a result, it appears as a AC DC Offline Switcher with a high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~105°C TJ. There are considerable benefits for Lighting.A termination of 7 is used to operate the LED driver.With 7 pins at the base, this LED driver has a base configuration.A voltage supply less than 8.8V could result in undetermined failures.There is a device mounted on the Surface Mount.The voltage of 28V is acceptable.In addition, it can be classified as Display Drivers according to its characteristics.The minimum input voltage for this device is 10.7V.In terms of supply current, there is a maximum value of 12.8V.When the maximum supply current is below 20mA, it is capable of delivering high efficiency.There is no current that can be supplied to the load.It is necessary to have 14V voltages inside systems to power them.Even when operating at a maximal output current of 400mA, it is capable of delivering all the benefits of a LED driver.This device has a voltage output of 12V volts.Voltages above 14V should not be allowed.A voltage of 10V is maintained as the minimal voltage it outputs.
NCL30060BDR2G Features
Available in the 8-SOIC (0.154, 3.90mm Width), 7 Leads package
Operating temperature of -40°C~105°C TJ
Supply voltage of 14V
Operating with the supply voltage of 14V
Output voltage of 12V
NCL30060BDR2G Applications
There are a lot of ON Semiconductor NCL30060BDR2G LED Driver ICs applications.
- Linear fluorescent
- A- lamps
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
- Stage and Studio lighting
- OLED power supply for portable equipment
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Dimmable LED for vehicle interiors
- Replacement lamps