NC7WB3306K8X
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | US8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4V~5.5V |
| Base Part Number | 7WB3306 |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 500mV |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.8 ns |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NC7WB3306K8X Overview
Digital switch is provided in the 8-VFSOP (0.091, 2.30mm Width) for the purpose of saving board space.The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The base part number is 7WB3306, which can also be used to find its logic switch related parts.There is a supply type of Single employed as part of this supply.Currently, it is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.As a result, signal multiplexer provides a total of 2 bits.There are no external influences on this multiplexer ic, so it consumes 3μA current.The resistance of the signal switching is 20Ohm.Signal switchs at temperatures up to 85°C are acceptable.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 7V maximum supply voltage.According to its specifications, the digital swith requires a minimum supply voltage of 500mV.There are 2 elements used for the mux switch configuration.
NC7WB3306K8X Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
NC7WB3306K8X Applications
There are a lot of ON Semiconductor NC7WB3306K8X Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Logic gates for other digital devices
- Data-routing applications
- Data collection system
- Metal detectors
- Make full adder
- Telephone network
- Microprocessor instruction decoding
- Decimal decoder
- Signal router