NC7SZ18FHX
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 20mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SZ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Terminal Finish | Nickel/Palladium (Ni/Pd) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 120mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SZ18 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 12.5 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
NC7SZ18FHX Overview
As a means of saving space, digital switch is provided in the 6-UFDFN.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Mounting is performed using Surface Mount.the multiplexers uses an analog IC Demultiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 1.65V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 7SZ series, these multiplexers have a wide range of applications.It is designed with 6 terminations as part of its basic configuration.The base part number is 7SZ18, which is also useful when looking up signal switch's related components.In multiplexer's system, 1.8V is the voltage supplied.NO LEAD is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.The board has 6 pins configured.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.Avoid unnecessary failures by keeping Vsup at 5.5V.mux switch's normal operation requires the power supply of 3.3V.As a result, the turn signal switch consists of 2 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.It consumes 1μA current of multiplexer ic without external influences.It is provided with 1 inputs.The switches package is packaged in accordance with TAPE AND REEL.
NC7SZ18FHX Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
Power supplies of 3.3V
NC7SZ18FHX Applications
There are a lot of ON Semiconductor NC7SZ18FHX Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Microprocessor input/output systems
- Injectors
- Idle motor
- Frequency multiplexing system
- To select different devices in microprocessor input
- Code converters
- VGA
- A robotic vehicle with the metal detector
- Enabling different functions units in microprocessor instruction decoding