NB4L52MNR2G
| Parameters | |
|---|---|
| Voltage - Supply | 2.375V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB4L52 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Number of Bits | 1 |
| Propagation Delay | 500 ps |
| Turn On Delay Time | 400 ps |
| Family | 4L |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Trigger Type | Negative Edge |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 2500000000Hz |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 11 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | LVPECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
NB4L52MNR2G Overview
16-VFQFN Exposed Padis the packaging method. It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Negative Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2.375V~5.5V. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. A total of 1elements are present in it. A total of 16terminations have been recorded. You can search similar parts based on NB4L52. The power source is powered by 2.5V. 4Lis the family of this D flip flop. It is mounted by the way of Surface Mount. This board has 16 pins. Its clock edge trigger type is Negative Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 1 Bits. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be kept above 2.375V for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch runs on a voltage of 2.5/5V volts. LVPECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5Vis also one of its characteristics. It is set to -25mAfor the high level output current. It is set to 25mAfor low level output current.
NB4L52MNR2G Features
Tape & Reel (TR) package
16 pins
1 Bits
2.5/5V power supplies
NB4L52MNR2G Applications
There are a lot of ON Semiconductor NB4L52MNR2G Flip Flops applications.
- ATE
- Individual Asynchronous Resets
- Bounce elimination switch
- ESD protection
- Single Up Count-Control Line
- Patented noise
- Modulo – n – counter
- Frequency division
- Memory
- Dynamic threshold performance