NB2304AI1DG
| Parameters | |
|---|---|
| Max Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | CMOS |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Number of True Outputs | 4 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 2 Weeks |
| Lifecycle Status | LIFETIME (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Zero Delay Buffer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB2304A |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
NB2304AI1DG Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. As you can see, it consists of 8 terminations. Clock generator ics require a voltage of 3.3V. A clock generator's input is called CMOS and it is designed as the input for this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. It has been classified as a Zero Delay Buffer electronic part, which means that it is a semiconductor. Microprocessors are specifically designed to use this clock-generating IC, which has a 8-bit output. According to the base part number, its related parts can be founded. There is a 8 pin that is available on the digital clock generator. Supply voltage 3.3V is what time clock generator can handle. Clock Drivers-type frequency generators are usually classified as this type. The maximal same edge skew (tskwd) can not be exceeded. There are 4 pins that are configured to enable high true output on this analog clock generator. By operating at a frequency of 133MHz, frequency generator is able to achieve high efficiency. During these clock generator operations, the maximum current supplied reaches 45mA.
NB2304AI1DG Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2304AI1DG Applications
There are a lot of ON Semiconductor NB2304AI1DG Clock Generators applications.
- Signal generator
- Satellite receivers
- Set-top boxes
- Satellite navigation communication
- Frequency synthesis
- Instrument
- Test and instrumentation equipment
- CPUs
- Signal frequency synthesis circuits
- Signal modulation and demodulation