N74F534D,623
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F534 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 165MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 86mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 7.5 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
N74F534D,623 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Tri-State, Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74F series. A frequency of 165MHzshould not be exceeded by its output. In total, it contains 1 elements. This process consumes 86mA quiescents. There are 20 terminations,This D latch belongs to the family of 74F534. The power supply voltage is 5V. It is a member of the F/FASTfamily of D flip flop. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. This D flip flop is equipped with 0 ports.
N74F534D,623 Features
Tape & Reel (TR) package
74F series
N74F534D,623 Applications
There are a lot of NXP USA Inc. N74F534D,623 Flip Flops applications.
- EMI reduction circuitry
- Automotive
- High Performance Logic for test systems
- Functionally equivalent to the MC10/100EL29
- Event Detectors
- Reduced system switching noise
- ESD protection
- Counters
- Buffered Clock
- Differential Individual